Now, the effect of this actuator is to tell the machine that a cartridge is actually present in the machine. The error code is also printed next to "NG." NOTE If an image is not attached,
View Most Popular Panafax UF-585 Plain Paper Laser Fax Fax Machines Related Question Cannot send or receive faxes to one particular number, but is able to send and receive faxes with If the fax was intentionally terminated, no action is required. Actually, the cartridge is generic, except for the position of this actuator. Retry the transmission. http://support.hp.com/us-en/document/buu02549
Press (Settings/Registration). 2. You should replace the fuser unit. You can't post answers that contain an email address.
The remote user pressed the Stop key while the reception was in progress. Enable ECM on both the local machine and the remote machine. 231 The remote machine attempted to initiate a transmission to the local machine, but the receive capability was disabled at An error code can have more than one definition (cause), and more than one solution. Hp Fax Error 346 Possibly the fax line is open (busy).
Question about Panasonic Fax Machines 1 Answer Fax can not be send and received fax can not be send and received error codes: 400, 402, 404 420 502 503 544 634 Fax Transmission Error Codes If this holding period exceeds a machine’s specific timeout value, the session is terminated. To print the manual completely, please, download it. http://www.fixya.com/support/t7048557-unable_send_fax_receive_comm_error Make sure that there is sufficient memory before making the call again.
Do not use call waiting on a line with a fax machine. Ecm Setting On Fax Am able to receive fax but cannot send back to same number. Glossary of Terms © 1996- OlsonBros. This can also be set on any receiving fax to reject junk fax.
If faxes are successfully sent to and received from other machines, but not this particular remote machine, then the issue is probably a problem with the remote machine. 252 Telephone line HP Fax Products - Fax Error Codes and Solutions This document is for HP fax products. Toshiba Fax Error Codes FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE Return tomain page RETURN TO WORLD OF FAX HOME PAGE FAX TX REPORT/FAX ERROR TX REPORT A Fax TX How To Disable Ecm On Hp Fax Machine Oct 14, 2014 | Panasonic Panafax UF-585 Plain Paper Laser... 0 Answers How to brighten LCD display of Panafax UF-585?
Configure the remote machine for poll transmission. this contact form Try sending at a lower transmission speed. 356 357 358 359 361 362 ECM 363 ECM 364 ECM 365 ECM 366 ECM The remote user pressed the Stop key, causing the The sending machine was unable to restart the control channel connection (handshake) before sending more data. Press [Function Settings] → [Send] → [Fax Settings]. 3. Error 344
If the local machine received several pages of a larger document successfully, ask the remote user to send the document in several smaller parts. 253 The remote machine attempted to initiate Or just drag it here! Check the power interruption report. (The transmission was canceled by pressing the [FUNCTION CLEAR] button.) Check polling options setup (Security Code, etc.), and check whether the polling document exists. have a peek here If the error still occurs, contact your service representative.
Depending on your printer, a fax error code might display on the printer control panel or on a fax history report. Hp Fax Error Code 350 troubleshooting for copyingpage 51................................................................................................................................................................ The paper is not correctly loaded and the document sensor cannot sense it.
only some part of the document received Apr 28, 2008 | Brother IntelliFAX 560 Plain Paper Fax 1 Answer Comm. Clear the jammed original. This occurs when the line is disconnected or if line conditions degrade during the session. Fax Error Codes Ricoh Panasonic Fax Machines View All » 234 people viewed this question Ask a Question Usually answered in minutes!
Confirm the remote party's Security Code, system password and your setup. Filter By: uf code c440 uf260 m475dn fuser xerorox 404 n7 126 questions posted Ask a Question Usually answered in minutes! The noise problem might go away over time. http://theresab.com/fax-error/fax-error-code-388.html Call the telephone provider if line conditions fail to improve.
Although this option is under the "Every Outbound Fax" menu, it appears to have resolved the problem with inbound faxes.Outbound faxes were never a problem. Poll transmission from a remote machine is typically configured with each fax session. Disable ECM, and then try to receive the fax again. Question about HP Fax Machines 1 Answer Error 59.CO on laserjet pro 400 color MFP M475dn error 59.CO on laserjet pro 400 color MFP M475dn Question about Ricoh Fax Machines 1
Error Code(s) Definitions/Causes Solutions 420 421 A handshaking (connection) error occurred at some point in the process from the sending fax machine. It's worth a thousand words. Complementary Content Search Fixya Press enter to search. Browse Categories Answer Questions Panasonic Panafax UF-585 Plain Paper Laser Fax Panasonic Fax Machine Fax Machines All Unanswered Join Sign In Ask a Question × HomeForumFax MachinesPanasonicPanafax UF-585 Plain Paper Laser
No solution is available because the two machines are incompatible. 318 The remote machine cannot support a fax reception at the page width selected by the local machine. May 11, 2011 | Fax Machines 1 Answer My fax can receive but is unable to send. Reconfigure the local fax machine to use different configuration settings, enable or disable the ECM setting. 245 ECM 246 ECM The user of the remote machine pressed the Stop key, causing