Home > Fax Error > Fax Error Codes List

Fax Error Codes List


The noise problem might go away over time. This might occur naturally depending on when the fax session is terminated. Unallocated Number This means the number dialed is no longer in service or cannot be reached due to a routing issue. The remote (calling) fax machine determined that there was a feature incompatibility between the two machines. Source

No action required 221 The user pressed the Stop key, causing the fax session to be prematurely terminated. Some errors can be identified using common-sense interpretations of the many three-letter acronyms such as DCN - DisCoNect; RTN - ReTrain Negative, EOM - End Of Message, etc. One of the few exceptions to this would occur if the remote machine was configured to poll transmit a document, but was unable to receive. It is possible that the remote user inadvertently attempted to poll. http://support.hp.com/us-en/document/buu02549

Fax Error Codes Ricoh

This is a temporary status and may subsequently change if credits have been bought. The list below shows the error number, the default outcome class, and a description of the error. There was a communication error with the sending fax machine. Retry the fax reception when telephone line conditions have improved.

Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results If the memory is full, empty the memory.R21Turn the Closed Network RX function off, or inform the recipient of the correct password.R22Turn the Closed Network RX function off, or inform the Ask the sender to re-send the document in parts as several smaller individual faxes, or to send at a lower resolution. 2XXX32 to 2XXX84 An error occurred while receiving a fax. Fax Error 346 Z7_3054ICK0KGTE30AQO5O3KA3015 hp-online-communities-portlet Actions ${title} Loading...

Query again later to get a final status. -2 Ready The fax has been prepared and is awaiting its turn in the outbound queue. How To Disable Ecm On Hp Fax Machine Confirm that the telephone line is properly connected to the machine. Try the fax when telephone line conditions have improved. Image density is too high.

Retry the fax reception when telephone line conditions have improved. Hp Fax Comm Error If not, reconfigure the local machine for a normal fax transmission. Other reasons can include power outages and other power-related problems. Specifically, fax tones or the fax handshake (connection) from the remote machine was not detected.

How To Disable Ecm On Hp Fax Machine

Login to your InterFAX account, click Purchase -> Prepaid Cards, select your required prepaid package, and proceed to checkout. 205001 Internal System error (FindRoute) Something unexpected has happened. http://faxagent.scrypt.com/article/417-fax-error-codes This occurs when the line is disconnected or if line conditions degrade during the session. Fax Error Codes Ricoh The receiving fax machine is an older silent fax machine. Error Code 700 Error In Fax Transmission Make sure paper is loaded correctly, paper is not jammed within the machine, and any other system errors have been cleared. 232 233 234 235 ECM 236 ECM 237 A communication

Try to send the fax using a different mode. http://theresab.com/fax-error/fax-error-codes-hp.html Special Information Intercept tone. Contact the destination; their fax machine may be out of paper or unplugged. It is possible that some pages or partial pages did go through successfully. Hp Fax Error 344

The tray set for [Select Paper Tray] under [Fax Features] did not contain A4, Letter, or Legal size paper. Query again later to get a final status. -3 Sending (or pending retry) The fax is in the process of being sent or awaiting its next attempt. The remote user should make sure paper is loaded in the machine, paper jams are fixed, and any error messages are cleared. 317 The remote machine cannot support a fax reception http://theresab.com/fax-error/fax-error-codes-244.html A full explanation of some errors requires familiarity with the ITU Recommendation T.30 (formerly CCITT Recommendation T.30).

Place the original in the correct orientation. Ecm Setting On Fax The paper tray does not contain paper of the right size. The fax was too large.

If the local machine consistently gives this error code from different fax numbers, then the issue is probably hardware related and the machine should be replaced or serviced.

Yes NoSend feedback Sorry we couldn't be helpful. Parameter error.27Attempted to send data that exceeds the maximum transferrable size for transfer coding.42WebDAV send is disabled.52The process is cancelled by a device reset.55A buffer shortage occurred.56The connection has already been We suggest your test the number by calling it from a land line to see if you can get through or change the fax number. Lexmark Fax Error Codes Contact the destination and get their land line fax number.

Make sure your documents contain no macros, that they are not password-protected, and that they are in our list of supported file types. 205000 Quota exceeded (Prepaid card depleted) You need This is a temporary status. Ask the community! Check This Out Try to send the fax when telephone line conditions have improved.

This is a temporary status. The entries below marked with an asterisk (83, 86, 88, 129, 186, 187) are an exception and can be changed to an outcome class which is retried. 58Znomorepagestosend 60*Zfailuretoupdatecontrolfile 61Zfailuretoinvokepre-processor 62Zfailuretoinvokepostprocessor Privacy Policy © Copyright 2016 HP Development Company, L.P. The fax was too large.

If you want remote polling, confirm that you have correctly configured the local machine for poll transmission. 229 The remote machine attempted to initiate a secure poll transmission from the local There was a paper jam. Query again later to get a final status. -22 Out of credit, awaiting topup The fax is being held until credit becomes available in the account. note: If errors occur every time a fax is sent or received, go to Troubleshooting Fax Transmission and Reception Issues.

Take corrective actions by referring to the table below.CodeCorrective ActionsR18Check your machine. See Removing Printing Jams. Complementary Content Support System Home Solutions Forums Return to Website How can we help you today?