Home > Fax Error > Fax Send Error 351

Fax Send Error 351

Contents

The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. They did line test and said "works 100%). Then press and set it to Off. Reply 0 0 Roger588 Student Posts: 1 Member Since: ‎08-17-2012 Message 3 of 3 (8,873 Views) Report Inappropriate Content Re: HP Officejet 4620 - Error 351 sending fax [Edited] Options Mark Source

For example, if you set the answering machine to answer calls after three rings, set the printer to answer calls after five rings. 3 To set the number of telephone rings Have the sender send from a different fax machine to see if the error clears. 242 The remote fax machine is attempting to receive instead of send. The user at the remote machine might have pressed the Stop key. Search Fixya Press enter to search.

Hp Officejet Pro 8600 Fax Error 351

This is a ridiculous situation. Enable remote diagnostics on the remote machine, if available. 315 The local machine attempted to initiate a remote diagnostic session, but detected that the remote diagnostic version supported by the remote However, the ability to send the entire document will be improved.Cause 3: The remote user pressed the Stop key while the reception was in progress. This could be determined by using the handset of the fax machine, dialing a single digit (to make the dialtone disappear) and listening to the phone's earpiece.

The click, heard for an incoming call, is actually a momentary disconnect of the line. Country: United States Select a location Americas Europe, Middle East, Africa Asia Pacific and Oceania Select a language Confirm Back Z7_M0I02JG0KOT530A6KJKFRQ0816 hp-detect-load-my-device-portlet Actions ${title} Loading... If the fax doesn't recognize the call as a fax, it will go through to the answering machine. Hp Fax Error 388 Remote diagnostics cannot occur between machines with incompatible remote versions.

If your fax machine/device is an HP brand (and/or the receiving end's fax machine is), pls check this link.Hope this be of initial help/idea. Did not work. Z7_3054ICK0KGTE30AQO5O3KA3016 hp-feedback-input-portlet Actions ${title} Loading... Z7_3054ICK0KGTE30AQO5O3KA30N0 hp-concentra-wrapper-portlet Actions ${title} Loading...

By using this site, you accept the Terms of Use and Rules of Participation IBM WebSphere Portal Home IBM Logo Sign Up Log In Welcome Getting Started Contact HP - Hp Fax Error 322 Retry the fax reception when telephone line conditions have improved. Try the fax when telephone line conditions have improved. 440 441 442 443 444 An error occurred during transmission after one or more partial pages were sent. There was a communication error with the sending fax machine.

How To Disable Ecm On Hp Fax Machine

Reply 0 0 « Message Listing « Previous Topic Next Topic » Related Documents Testing Your HP Fax Machine with the HP Fax Test ServiceHP Printers - Network Scanner Connection is navigate here Try sending at a lower transmission speed. 356 357 358 359 361 362 ECM 363 ECM 364 ECM 365 ECM 366 ECM The remote user pressed the Stop key, causing the Hp Officejet Pro 8600 Fax Error 351 Configure the remote machine for poll transmission. Hp Fax Error 344 I have a fiber optics telephone connection.

The click, heard for an incoming call, is actually a momentary disconnect of the line.Solution: Disable ECM. Confirm that the fax/phone cable is no longer than required, and that it does not pass near unshielded electric motors such as fans, heaters, or household appliances. Also under rare conditions, incompatibility between the two machines might cause the remote machine to abandon the call.Solution: Try sending at a lower transmission speed. You can't post answers that contain an email address. Hp Fax Error Code 350

issue may be with telephone line conditions, try sending a fax at a different time 2. Try sending at a lower transmission speed Here is a helpful link for Troubleshooting Fax Transmission and Reception Issues. Depending on your printer, a fax error code might display on the printer control panel or on a fax history report. http://theresab.com/fax-error/fax-send-error-344.html After reading "could be line problem" I called COX.

error The machine has a ECM (Error Correction)error.Could be: The remote machine has failed to respond. Sharp Fax Error Codes If your phone line has static or other noise problems, turn off the ECM (Error Correction Mode) setting and try faxing again. Error Code(s) Definitions/Causes Solutions 386 387 388 389 390 391 392 393 394 395 There is too much noise on the line for a valid connection between two fax machines to

A simple solution would be to use a different outlet and/or use a surge suppressor.

Select a slower reception speed. Then press and set it to Off. Errors might still occur, and might result in a degraded image quality on the received page. Hp Fax Test Select a slower reception speed.

It can also be caused if the receiving fax is using a fax format incompatible with the HP fax (usually during color faxing) or the line speed drops to an unacceptable This is a nightmare and HP is of no help. You see this screen: Select Communication, then press OK. Retry the transmission.

Try to receive the fax when telephone line conditions have improved. HP Officejet 6500 Wireless... 10 Answers No scan options say refer to device documention to trouble shoot HP Officejet 5610 All-In-One... 38 Answers HP Officejet 5610 All-in-One scanner will not work These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). HP OfficeJet 7410 All-In-One... 14 Answers Cannot delete print job HP PSC 1315 All-In-One InkJet... 11 Answers Free download driver HP PSC 1410 HP PSC 1410 All-In-One InkJet... 12 Answers WHERE

However, the ability to send the entire document improves. Call the telephone provider if line conditions fail to improve. This page requires Javascript. Follow these steps to turn off the ECM setting: Press Setup.

Call the telephone provider if line conditions fail to improve.